Akicon™ Custom Handcrafted Copper Range Hood - AKH701T-C

MOTOR FAN IN HOOD EXHAUST SYSTEM

• The motor fan in hood system has the motor(s) inside the copper hood.
• This system comes with lights, switches and stainless steel baffle filters inside the copper hood.
• The liner is 304 grade stainless steel, 120 volts 60hz, and is equipped with reusable stainless steel baffle filters.
• The motor(s) run on an average of 7 sones.

MOTOR FAN IN ATTIC EXHAUST SYSTEM

• The motor fan in attic system has the motor inside the attic.
• This system comes with lights, switches, stainless steel baffle filters inside the copper hood.
• The liner is 304 grade stainless steel, 120 volts 60hz, and is equipped with reusable stainless steel filters.
• The motor runs on an average 7 sone volume
• The attic motor is ideal for those who need a virtually silent system.

NO MOTOR FAN/LINER ONLY EXHAUST SYSTEM

• The No Motor Fan system requires the purchase of a separate External Blower System
• The No Motor system has the motor(s) on the outside of your structure.
• This system comes with lights, switches, stainless steel baffle filters inside the copper hood.
• The liner is 304 grade stainless steel, 120 volts 60hz, and is equipped with reusable stainless steel filters.

Vent Material: Commercial grade SUS304 / 20 gauge

Vent Body Design : Full seamless stainless steel construction

Exhaust Fan Type: Centrifugal blower

Control Type: 4-speed touch electronic control panel with heat sensor

Airflow:

30″/36″-280CFM/390CFM/520CFM/610CFM

42″/48″-385CFM/540CFM/715CFM/1050CFM

54″/60″-460CFM/860CFM/1260CFM

Max.Noise Level:

30″/36″ 1.2Sone(43dB) / 2.8Sone(55dB) / 5.0Sone(63dB) / 7.0Sone(68dB)

42″/48″ 1.5Sone(46dB) / 3.5Sone(58dB) / 5.3Sone(64dB) / 7.5Sone(69dB)

54″/60″ 1.8Sone(35dB)/ 5.5Sone(53dB)/8.5Sone(70dB)

Power Rating: 120V / 60Hz

Wattage: (Delayed power auto shut off)

30″/36″-120W

42″/48″/54″/60″-240W

Duct:

30″/36″-6″round

42″/48″-8″round

54″/60″-10″round

Illumination:

30″/36″-2 x 3W LED lights

42″/48″-3 x 3W LED lights

54″/60″-6 x 3W LED Lights

Filtration Type: Stainless steel 304 baffle filter (reusable, dishwasher-friendly)

ETL Listed: Yes

Mounting Version: Wall mount, Under-cabinet, Island mount  

AKICON will provide a free finish sample to ensure you get copper products' actual colors and textures.
 

Need free sample, please contact service@akiconshop.com



 

Note

Since our products are handmade from copper, small differences in patina and texture can occur. We do not consider product variances as defects.

pron Design Placement:

Patterns may be centered with a frame or without a frame, wrapped around and full front.

• On full front
• In the center of apron without frame
• In the center of the apron with frame
• Wrap-around

Apron Pattern Design

Select from a variety of apron designs under the APRON PATTERN DESIGN section.

If you have a custom IMAGE, please send it to service@akiconshop.com

STRAP AND RIVET OPTIONS:

• * 5, 4, 3, 2, or no straps on the hood
•  
• * Rivets placed on some or all straps
•  
• * Small or large rivets placed on the hood apron
•  
• * Custom strap or rivet placement

Akicon's products are made for longevity and utility in addition to aesthetic appeal. Copper products can endure heavy use, so long as it's cleaned well.

Akicon copper products have been treated with a clear lacquer sealant that is tarnish-resistant.

Do not use copper polish/cleaners, abrasive materials, acidic or abrasive cleaners, or harsh chemicals such as acetone, which will compromise the integrity of the lacquer finish.

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

To Minimize Tarnishing Copper:
 
Copper is a highly reactive metal, and as such it's prone to tarnishing from water, harsh chemicals, and oxygen. Contact with human skin and its oils will also cause copper to tarnish over time, which is why copper jewelry and utensils can discolor quickly.

If your once shining copper surface is now a dull brown or even green, fear not, for nearly all discoloration can be turned.

To minimize the problem, there are several things to keep in mind.
* Reduce the amount of time your copper item is wet or exposed to chemicals(especially acids)
* Do not leave pools of water on it.
* Avoid direct acid exposure(such as lemon juice, ketchup, baking soda, vinegar, sauce, etc.)
* Avoid mineral oil.

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

How to Clean your Copper

After some use, you notice that your copper piece has discolored or accumulated some grime. Here's how to clean it, according to a different kind of situation.

* Clear-coat gloss or Matte finish: these will preserve the original look of the copper pieces and protect against some wear.

* Living finish: allow the copper surface to develop an uninhibited patina that is completely unique to you.

While there are mild copper cleaners bought from stores that can work well, we have an easy and cost-effective way to make your own cleaner from household items.

1, Sprinkle salt over the tarnished copper.
2, Drizzle vinegar over the salt.
3, Add more salt on top of the vinegar.
4, Gently buff with a soft cloth until the tarnish is removed.
5, Rinse with water and dry thoroughly.

Items you will need:

* Cleaner(Buy or DIY)
* Soft non-abrasive cotton cloth 
* Warm water

Maintenance:

Use warm water, mild non-acidic liquid detergent or DIY cleaner, and a soft non-abrasive cotton cloth to remove any grease or grime.

** IMPORTANT: Do not use sharp objects like a steel wool scrubber to clean copper surfaces.**